PRODUCT AND SERVICE

Strong research and development and production capacity in textile auxiliaries, polyurethane waterproofing additives and other materials.

Dyeing/Printing Agents
Product Details

-DHK 4BK-S is an optical brightening agent with violet-red shade, it is suitable for whitening of cotton, T/C by exhaustion or padding process.

Key Features and Typical Benefits

◆ With obvious violet-red shade and performs good washing fastness.

◆ Performs high whitening effect.

◆ It is suitable for alkali-hydrogen peroxide and whitening in one bath with excellent whiteness and brilliance.

◆ Good resistance to weak acid, alkali, perborate and H2O2.

Properties

Property

Value

Physical Form

Solid

Appearance

Slight yellow green powder

Water Content (%)

≤5.0

Ultraviolet Absorption

80-110

Flash Point(°C)

>100

Ionic Character

Anionic

Application

DHK 4BK-S is a powdery product. Before dilute, make it to paste form by adding 1 part of 4BK-S and 2 parts of cold water, then add hot water at 70-80℃ by 50 times of the diluted paste, stir and filter evenly , ready for use. It is suitable for over-flow machine, jig machine, etc.

1. Exhaustion whitening process:

Dosage:                  0.1-0.8% (o.w.f)

Anhydrous sodium sulfate:  0-15 g/L

Temperature:             80-100℃

Time:                       20-40 mins

2. Pretreatment and whitening in one bath:

Dosage:                   0.1-0.8%(o.w.f)

Scouring agent.:     0.3-0.5 g/L

NaOH:                     2-5% (o.w.f)

H2O2(100%):               2-3 %(o.w.f)

Peroxide Stabilizer .:      0.2 %(o.w.f)

Temperature:              95-100℃

Time:                     40-60 min

3. Padding process

Dosage: 1-6 g/L

Procedure: One dipping one padding (pick-up 70%)→Pre-drying(100℃)→Curing(160℃)

Note

The higher of the dosage, the stronger of the blue-violet color shade. Actual process should be adjusted according to preliminary tries.

Operating and safety instructions

1. Suggest weighing and diluting separately when prepare the solution, then add it to machine.

2. Strongly recommend to use soft water during dilution, if soft water is not available, the stability needs to be tested before making the solution.

3. After dilution, it should not be stored for a long time.

4. To ensure the safety, you should review our Material Safety Data Sheets before using this product under special conditions. MSDS is available from us. Before handling any other products mentioned in the text, you should obtain available product safety information and take necessary steps to ensure safety of use.

Package & Storage

Cardboard drum 50 kg

Can be stored for 12 months under room temperature and hermetic condition without exposure to sunlight.

ATTENTION

The above recommendations are based on comprehensive studies conducted in the practical finishing. They are, however, without liability regarding property rights of third parties and foreign laws. The user should test whether the product and the Application: are suited for his very special purposes.

We are, above all, not liable for fields and methods of Application: which have not been put down by us in writing.

Advice for marking regulations and protective measures can be taken from the respective safety data sheet.


Inquiry Now
If you have any questions, please leave us a message and we will get back to you in the first time!

Qingdao Hengke Fine Chemicals Co.,Ltd